Policy translation and configuration using dynamic template

To solve the problem of complex,cumbersome and error-prone configuration of security devices caused by the heterogeneous configuration modes in complex networks,a dynamic template-based scheme for translating and configuring policy was proposed.In detail,considering the code’s features,the code-based template for translating policies was constructed to configure the command line conversion,and the keyword comparison method was used to ensure the accuracy of policy configuration.Experiments show that the scalability and the accuracy of the proposed scheme.     

组合轮径差对地铁车辆动力学性能的影响

为了研究各种轮径差组合形式对地铁车辆动力学性能的影响,基于车辆系统动力学和赫兹非线性接触理论,建立地铁动车非线性动力学模型,分析各种轮径差组合工况下地铁车辆的临界速度、平稳性、安全性和磨耗功率及其变化规律。结果表明:在多种轮径差组合工况下,轮径差增大会使地铁车辆的临界速度有较大幅度降低,会使地铁车辆的横向平稳性和磨耗功率明显增大;轮径差对地铁车辆的垂向平稳性、轮轴横向力、轮轨垂向力、脱轨系数和轮重减载率影响较小;通过左、右曲线时,轮径差对磨耗功率增幅的影响存在差异,但变化规律一致。     

一种外LET柔顺半铰的动力学建模与分析

对一种外LET柔顺半铰进行建模与动力学特性分析。采用斜率不连续的绝对节点坐标法（ANCF）建立了该柔顺半铰系统动力学方程；对外力作用下半铰中心线和外轮廓的运动变形进行仿真，与实验结果对比，证明了绝对节点坐标法对柔顺半铰动力学建模的有效性；进一步分析了半铰外形尺寸变化对其变形规律的影响。     

Simplification and applicability studies of a hydrogen-air detailed reaction mechanism

The research of hydrogen fuel internal combustion engine (HICE) had great significance facing the challenges of energy and environmental problems. Based on the detailed hydrogen-air reaction mechanism, the pre-mix model of CHEMKIN-Pro software was selected to simplify the detailed mechanism GRI-3.0. The most important elements and reactions was chose to construct framework mechanism firstly based on the sensitivity coefficient for H₂O and NO formation, and additional elements and reactions were added to framework mechanism for complementing the oxidation path of N2 and H₂. A simplified mechanism including 24-step elementary reaction was obtained and the laminar burning velocity calculated by this simplified mechanism matches well with the detailed mechanism in a wide range. This simplified mechanism was also applied in a CFD model which predicted the cylinder instantaneous pressure and NOx emission accurately within a large range of fuel air equivalent ratio. Showing that this mechanism has good applicability.     

NiH/Hβ催化剂的制备及催化正己烷异构化性能

采用浸渍还原法制备了一种新型镍氢化物/分子筛（NiH/Hβ）烷烃异构化催化剂，考察了催化剂制备条件及反应条件对其催化正己烷异构化性能的影响。结果发现，当活性组分质量分数为0.5%，反应温度为300 ℃，反应压力为2.0 MPa，氢/油摩尔比为4.0及质量空速为1.0 h^-1时，NiH/Hβ催化剂催化正己烷异构化活性最优，正己烷的转化率为83.0%，异构烷烃的选择性与收率分别达到78.6%、65.2%。根据实验结果，提出了NiH/Hβ催化剂催化正己烷异构化反应机理，证明NiH金属活性中心具有良好的加氢/脱氢功能。     

Investigation of non-isothermal crystallization,dynamic mechanical and dielectric properties of poly(ether-ketone) matrix composites

ABSTRACT

Poly(ether-ketone)/hexagonal boron nitride (h-BN) composites reinforced with micrometer-sized h-BN particles were investigated. The composites exhibited glass transition temperature (T_g) and thermal stability over 160°C and 560°C, respectively. The melting point and peak crystallization temperatures of the composites decreased up to 17°C and 12°C, respectively. The linear CTE of the composites decreased both below and above the T_g. The storage modulus increased with increasing h-BN content at all temperatures (50–250°C). The composites possessed excellent dielectric properties with insignificant dispersion with increasing frequency. Thus, resultant composites are promising candidates for the printed circuit boards/electronic substrates.     

Non-linear dissolution mechanisms of sodium calcium phosphate glasses as a function of pH in various aqueous media

Phosphate glasses for bioresorbable implants display dissolution rates that vary significantly with composition, however currently their mechanisms of dissolution are not well understood. Based on this systematic study we present new insights into these mechanisms. Two-stage dissolution was observed, with time dependence initially parabolic and later linear, and a two-stage model was developed to describe this behaviour. Dissolution was accelerated by lower Ca concentration in the glass, and lower pH in the dissolution medium. A new dissolution mechanism is proposed, involving an initial stage where diffusion-controlled formation of a conversion layer occurs. Once the conversion layer is stabilised, layer dissolution reactions become rate-limiting. Under this mechanism the transition time is sensitive to the nature of the conversion layer and solution conditions. These results reveal the dependence of P₂O₅–CaO–Na₂O glass dissolution on solution pH, and provide new insight into the dissolution mechanisms, particularly regarding the transition between the two dissolution stages.     

新型限力输出保护功能柔性夹钳的设计与参数评估

柔性夹钳因具有微/纳精密操作能力, 常应用于微操作系统中, 但因抓爪无法提供恒定输出力或恒力范围小, 容易造成操作对象的损伤或脱落。根据放大模块与常力模块串联的结构形式, 设计了一种具有常力特性的柔性夹钳。基于伪刚体法, 建立放大模块中桥式机构与杠杆机构的刚度和放大率数学模型, 通过对倾斜导向梁进行分析, 得到常力模块的力-位移关系式, 计算出恒定输出力为42.5 N, 输出范围为370 μm。最后, 结合不同柔顺梁的结构参数, 运用MATLAB仿真探究了各关键参数对常力特性的影响。研究结果可为常力柔性夹钳的构型设计和分析提供一定的理论支撑。     

Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler

High entropy alloy(HEA) of Fe Co Ni Ti Al and Inconel 718 superalloy were firstly transient liquid phase(TLP) bonded by BNi2 filler due to the diffusion of Si and B in the filler to the base metals. The effects of bonding time on microstructure evolution and mechanical properties of the TLP joints were investigated.Owing to the complete isothermal solidification of the joints bonded for 30 min 120 min at 1100°C,no athermally solidified zones(ASZs) formed by eutectic phases were observed in the welded zone. Thus the TLP joints were only composed by the isothermally solidified zone(ISZ) and two diffusion affected zone(DAZ) adjacent to the dissimilar base metals and the negative effect of the ASZ on joint properties can be avoided. In addition, the increase of the bonding time can also make the Ti B2 borides precipitated in the DAZ near HEA and the brittle borides or carbides in the DAZ near IN718 alloy decrease and reduce the possibility of the stress concentration happened in the joints under loading. Therefore, the highest shear strength(632.1 MPa) of the TLP joints was obtained at 1100°C for 120 min, which was higher than that of the joint bonded for 30 min, 404.2 MPa. Furthermore, the extension of the bonding time made the fracture mechanism of the joint be transformed from the intergranular fracture to the transgranular fracture. However, as the brittle borides in the DAZ near IN718 can not be eliminated completely and refining of grains also happened in such region, all the TLP joints fractured inner the DAZ near IN718 alloy.